CBSE Sample Papers for Class 12 Chemistry Solved 2016 Set 10

Section A

1.Convert 1° alcohol to 20 alcohol.

2.Write a test to differentiate between pentan-2-one and pentan-3-one.

3.How do you explain the presence of all the six carbon atoms in glucose in a straight chain?

4.Why does white ZnO(s) becomes yellow on heating?

5.Iodine is more soluble in KI than in water.

Section B

6.Account for the following:

(i) Alkaline medium inhibits the rusting of iron.

(ii) Why is alternating current used for measuring resistance of an electrolytic solution?

7.What are the IUPAC names and give the structure of the insecticide DDT and BHC ? Why is their use banned in India and in other countries?

8.What will be the osmotic pressure of 0.1 M monobasic acid, its pH is 2 at 25°C ?

9.Give two requirements for vapour phase refining.

10. Calculate the order of the reaction from the following data

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-10

Section C

11.(i) Write the structure of pyrophosphoric acid, dithionic acid and Marshall’s acid.

(ii) PC15 reacts with finely divided silver on heating and a white silver salt is obtained, which dissolves on adding excess aqueous NH3 Write the reactions involved to explain what happens?

12.Vapour pressure of pure water at 298 K is 23.8 mmHg. 50 g of urea (NH2CONH2 ) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering.

13. An element occurs in bcc structure. It has a cell edge length of 250 pm. Calculate the molar mass, if its density is 8.0 g cm-3 . Also, calculate the radius of an atom of this element.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-14

15. A solution containing 0.319 g of CrCl3-6H20 was passed through a cation exchange resin and acid coming out of the cation exchange resin required 28.5 mL of 0.125 M NaOH. Determine the correct formula of the complex [molecular weight of the complex =266.5gmor1].

16. (i) What happens when gelatin is mixed with gold sol?

(ii) How do emulsifying agents stabilise the emulsion?

(iii) Why does bleeding stop by rubbing moist alum?

17.(i) Give the name and structure of the initial material used in the industrial preparation of phenol.

(ii) Write complete reaction for the bromination of phenol in aqueous and non-aqueous medium.

(iii) Explain, why Lewis acid is not required in bromination of phenol.

18. In what respect do prontosil and salvarsan resemble? Is there any resemblance between azo dye and prontosil? Explain.

19. Write the names and structures of monomers of

(i) natural rubber. (ii) terylene.     (iii) teflon.

Or

Are polyesters and polyacrylates same? Justify your answer.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-20

21. (i) What are the essential and non-essential amino acids? Give two examples of each type.

(ii) What causes the disease sickel cell anaemia?

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-22

Section D

23. Oxygen atom transfer from N02 to CO produces NO and C02.

NO, (g) + CO(g)—– ► NO (g) + C02 (g)

This reaction can also be utilised to remove poisonous gases like N02, CO, etc., from the atmosphere.

The rate equation for this reaction at temperature less than 500 K is Rate =k [N02 ]2.

Based on the above information, answer the following questions.

  • Can this reaction occur in one bimolecular step?
  • If the concentration of N02 is doubled, what will be the rate of the reaction?
  • Addition of catalyst increases the rate of the reaction. Why?
  • What values do you get from the above passage?

Section E

24. An alkene A (molecular formula C5H10) on ozonolysis gives a mixture of two compounds B and C . Compound B gives positive Fehling’s test and also forms iodoform on treatment with I2 and NaOH. Compound C does not give Fehling’s test but forms iodoform. Identify the compounds A, B and C. Write the reaction for ozonolysis and formation of iodoform from B and C.

Or

When liquid A is treated with a freshly prepared ammoniacal silver nitrate solution, it gives bright silver mirror. The liquid forms a white crystalline solid on treatment with sodium hydrogen sulphite. Liquid B also forms a white crystalline solid with sodium hydrogen sulphite but it does not give test with ammoniacal silver nitrate. Which of the two liquids is aldehyde? Write the chemical equations of these reactions also.

25. A violet compound of manganese A decomposes on heating to liberate oxygen and compounds B and C of manganese are formed. Compound C reacts with KOH in the presence of potassium nitrate to give compound

On heating compound C with cone. H2S04 and NaCl, chlorine gas is liberated and a compound D of manganese along with other products is formed. Identify compounds A to D and also explain the reactions involved.

Or

  • Transition metals can act as catalysts because these can change their oxidation state. How does Fe(III) catalyse the reaction between iodide and persulphate ions?
  • Mention any three processes where transition metals act as catalysts.

26. Assign reasons for the following.

  • Describe the favourable conditions for the manufacturing of (a) ammonia by Haber’s process, and (b) sulphuric acid by contact process.
  • Draw the structures of the following.
  • PCl5(g) (b) S8(g) (c) C1F3 (g)

Or

Assign reasons for the following.

  • Sulphur in vapour phase is paramagnetic.
  • Ammonia (NH3) has greater affinity for protons than phosphine (PH3).
  • The negative value of electron gain enthalpy of fluorine is less than that of chlorine.
  • BiCl3 is less covalent than PC13. Explain.
  • In noble gases, only xenon is known to form well established chemical compounds.


Answers

Section A

1.Convert 1° alcohol to 20 alcohol.

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-1

2.Write a test to differentiate between pentan-2-one and pentan-3-one.

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-2

3.How do you explain the presence of all the six carbon atoms in glucose in a straight chain?

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-3

4.Why does white ZnO(s) becomes yellow on heating?

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-4

5.Iodine is more soluble in KI than in water.

Ans.

Section B

6.Account for the following:

(i) Alkaline medium inhibits the rusting of iron.

(ii) Why is alternating current used for measuring resistance of an electrolytic solution?

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-6
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-6a

7.What are the IUPAC names and give the structure of the insecticide DDT and BHC ? Why is their use banned in India and in other countries?

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-7
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-7a

8.What will be the osmotic pressure of 0.1 M monobasic acid, its pH is 2 at 25°C ?

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-8

9.Give two requirements for vapour phase refining.

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-9

10. Calculate the order of the reaction from the following data

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-10

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-10
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-10a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-10aa

Section C

11.(i) Write the structure of pyrophosphoric acid, dithionic acid and Marshall’s acid.

(ii) PC15 reacts with finely divided silver on heating and a white silver salt is obtained, which dissolves on adding excess aqueous NH3 Write the reactions involved to explain what happens?

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-11
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-11a

12.Vapour pressure of pure water at 298 K is 23.8 mmHg. 50 g of urea (NH2CONH2 ) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering.

Ans.
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-12
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-12a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-12aa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-12aaa

13. An element occurs in bcc structure. It has a cell edge length of 250 pm. Calculate the molar mass, if its density is 8.0 g cm-3 . Also, calculate the radius of an atom of this element.

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-13
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-13a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-13aa

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-14

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-14
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-14a

15. A solution containing 0.319 g of CrCl3-6H20 was passed through a cation exchange resin and acid coming out of the cation exchange resin required 28.5 mL of 0.125 M NaOH. Determine the correct formula of the complex [molecular weight of the complex =266.5gmor1].

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-15
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-15a

16. (i) What happens when gelatin is mixed with gold sol?

(ii) How do emulsifying agents stabilise the emulsion?

(iii) Why does bleeding stop by rubbing moist alum?

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-16

17.(i) Give the name and structure of the initial material used in the industrial preparation of phenol.

(ii) Write complete reaction for the bromination of phenol in aqueous and non-aqueous medium.

(iii) Explain, why Lewis acid is not required in bromination of phenol.

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-17
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-17a

18. In what respect do prontosil and salvarsan resemble? Is there any resemblance between azo dye and prontosil? Explain.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-18

19. Write the names and structures of monomers of

(i) natural rubber. (ii) terylene.     (iii) teflon.

Or

Are polyesters and polyacrylates same? Justify your answer.

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-19
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-19a

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-20

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-20
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-20a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-20aa

21. (i) What are the essential and non-essential amino acids? Give two examples of each type.

(ii) What causes the disease sickel cell anaemia?

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-21
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-21a

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-22

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-22

Section D

23. Oxygen atom transfer from N02 to CO produces NO and C02.

NO, (g) + CO(g)—– ► NO (g) + C02 (g)

This reaction can also be utilised to remove poisonous gases like N02, CO, etc., from the atmosphere.

The rate equation for this reaction at temperature less than 500 K is Rate =k [N02 ]2.

Based on the above information, answer the following questions.

  • Can this reaction occur in one bimolecular step?
  • If the concentration of N02 is doubled, what will be the rate of the reaction?
  • Addition of catalyst increases the rate of the reaction. Why?
  • What values do you get from the above passage?

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-23
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-23a

Section E

24. An alkene A (molecular formula C5H10) on ozonolysis gives a mixture of two compounds B and C . Compound B gives positive Fehling’s test and also forms iodoform on treatment with I2 and NaOH. Compound C does not give Fehling’s test but forms iodoform. Identify the compounds A, B and C. Write the reaction for ozonolysis and formation of iodoform from B and C.

Or

When liquid A is treated with a freshly prepared ammoniacal silver nitrate solution, it gives bright silver mirror. The liquid forms a white crystalline solid on treatment with sodium hydrogen sulphite. Liquid B also forms a white crystalline solid with sodium hydrogen sulphite but it does not give test with ammoniacal silver nitrate. Which of the two liquids is aldehyde? Write the chemical equations of these reactions also.

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24aa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24aaa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24aaaa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-24aaaaa

25. A violet compound of manganese A decomposes on heating to liberate oxygen and compounds B and C of manganese are formed. Compound C reacts with KOH in the presence of potassium nitrate to give compound

On heating compound C with cone. H2S04 and NaCl, chlorine gas is liberated and a compound D of manganese along with other products is formed. Identify compounds A to D and also explain the reactions involved.

Or

  • Transition metals can act as catalysts because these can change their oxidation state. How does Fe(III) catalyse the reaction between iodide and persulphate ions?
  • Mention any three processes where transition metals act as catalysts.

Ans.

cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-25
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-25a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-25aa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-25aaa

26. Assign reasons for the following.

  • Describe the favourable conditions for the manufacturing of (a) ammonia by Haber’s process, and (b) sulphuric acid by contact process.
  • Draw the structures of the following.
  • PCl5(g) (b) S8(g) (c) C1F3 (g)

Or

Assign reasons for the following.

  • Sulphur in vapour phase is paramagnetic.
  • Ammonia (NH3) has greater affinity for protons than phosphine (PH3).
  • The negative value of electron gain enthalpy of fluorine is less than that of chlorine.
  • BiCl3 is less covalent than PC13. Explain.
  • In noble gases, only xenon is known to form well established chemical compounds.

Ans.


cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26a
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26aa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26aaa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26aaaa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26aaaaa
cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-26aaaaaa

(Download Questions PDF)

[gview file=”https://resultscareer.files.wordpress.com/2015/12/cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-questions.pdf”]

(Download Solutions PDF)

[gview file=”https://resultscareer.files.wordpress.com/2015/12/cbse-sample-papers-for-class-12-sa2-chemistry-solved-2016-set-10-solutions.pdf”]